Attaching Gazebo To Paver Patio: The Four Different Methods

This site contains affiliate links to products. We may receive a commission for purchases made through these links.

Attaching a gazebo to a paver can be a frustrating task because pavers aren’t designed to withstand the outdoor climate.

If you’ve experienced frustration with the wind taking away your gazebo and pavers, then there are steps you can take to install them properly.

A correctly installed gazebo will also add to the beauty of your patio and protect your patio furniture from the sun and rain.

Luckily, there are a few different methods for attaching gazebo to paver patios that you can learn.

We’ll give you a breakdown and go in-depth about how you can successfully and safely secure your gazebo to your paver patio.

Additionally, we’ll provide tips and adjustments you can make to help ensure that your gazebo doesn’t go flying away when higher winds hit.

The Different Methods on How To Attach a Gazebo

You should expect that securing a gazebo to a paver patio will be a challenging and time-consuming process.

That is especially if this is your first time doing handyman works.

Thus, it’s best to learn multiple techniques that can help secure your gazebo down in harsh climates.

It is the first recommended step you should take, especially if you live in an area with varying weather conditions.

Below are some of the most effective ways of keeping your gazebo down.

1. Fill Plants With Concrete

Filling plants with concrete is the easiest and most decorative method to securing your gazebo.

The best part is, no one will ever suspect that the flowery potted plants are helping secure your gazebo to the ground.

Let’s find out how you can do this successfully.

What You’ll Need

To secure your gazebo using plants, you need to prepare the following materials:

  • Planting pots
  • Concrete
  • Mixing bucket
  • Water
  • Bricklaying trowel
  • Safety gloves
  • A safety mask

What You Should Do

Now that you have the things that you need, here are the steps you need to take:

Step #1: Place Posts in Pots

Take five-gallon planting pots and place your gazebo’s posts into each pot.

You’ll need as many five-gallon planting pots as you do total gazebo posts.

It would be best if you got at least three other people to help you raise the gazebo to lift the posts.

Once you lift the gazebo, sneak the plant pot underneath the gazebo’s leg.

Repeat the last step until all posts have a corresponding planting pot.

Step #2: Mix the Concrete

Start by putting on your safety gloves and a mask to prevent the chemicals from touching your skin.

Now, carefully measure out the concrete mixture and pour it into a bucket.

After that, add enough water to the mix by following the instructions on the bag of concrete.

Once you’ve added the water, stir the mixture until it reaches a good consistency and doesn’t contain any lumps or crumbs.

Step #3: Pour the Concrete

The next thing you need to do is pour the concrete mixture into each planting pot within 20 minutes of mixing the concrete.

Allow a minimum of 48 hours for the concrete mixture to set before touching.

Once the cement sets, you can put a small layer of dirt on top of the cement and plant flowers

2. Drill Stakes Between Each Paver

Drilling stakes between each paver will be extremely useful.

That’s because it will secure the gazebo into the ground without damaging your patio.

If you’re in an area with high winds, then this method is going to be the most successful at preventing your gazebo from flying away.

With that in mind, let’s discuss this method in detail.

What You’ll Need

You will need a few materials before you can secure your gazebo using this method, including:

  • Stainless steel ground stakes
  • Hammer
  • Rope

51tur1MAD5L. SL500

What You Should Do

The recommended steps that you need to take for this method are as follows:

Step #1: Adjust the Gazebo 

Adjust the posts on the gazebo to install the stakes between each adjoining brick.

Start by rotating the plastic post base so that the stakes can fit directly into the holes.

Step #2: Drive Stakes Between Pavers

Place the stainless steel stakes so that they are in between the grooves and pavers.

Next, take a hammer and pound on the stainless steel stakes until they’re deep into the soil.

From there, make sure to secure each post with two stakes or more if necessary.

Step #3: Secure With Rope

Take a rope and tie it to the hooks located on your gazebo.

From there, loop the rope around each gazebo’s corner and then have the rope fall to the ground.

After that, secure the rope to each of the corner stakes in the ground.

3. Drill Into the Pavers

Drilling into the pavers is a bit riskier than the other options, as it can damage your patio.

However, it’s a highly reliable method to keep your gazebo safe and secure.

As such, below is the detailed method on how to secure your gazebo by drilling it into your pavers.

What You’ll Need

To do this method, you will need the following materials:

  •  A pencil
  • Tape 
  • A vacuum
  • Drill 
  • Masonry screws

What You Should Do

To succeed in this technique of attaching gazebo to paver patio, follow these steps:

Step #1: Mark the Holes

Start by positioning the gazebo exactly how you want it to look.

From there, you should take a pencil and mark precisely where you want the holes to be on the paver.

Now, you’ll want to move the gazebo to the side to see where you marked the holes.

Step #2: Drill the Holes 

Before you begin drilling, mark the depth of the screws onto the masonry drill bit using tape.

After you have that setup, start drilling holes into the paver except drilling them at a 90-degree angle.

Make sure each screw is secure before cleaning the dust off from each hole.

To clean the dust off thoroughly, you should use a vacuum cleaner.

Step #3: Drill the Masonry Screws

Carefully slide the gazebo back into place.

Now, align the pavers with the holes on the gazebo.

After the holes are aligned, take your drill and switch to the Philips flat head or slotted hex bit.

Now, drive the screws into the gazebo. The deeper they are, the better.

61+E eGkcFL. SL500

4. Build Concrete Footers Below the Pavers 

This last method is highly effective for homeowners who live in harsh weather climates.

The problem is that it is also one of the most tricky methods to securing your gazebo.

Luckily, we can walk you through the whole process.

What You’ll Need

You’ll need the following materials and tools for this method:

  • A flathead screwdriver
  • Chalk
  • Water
  • A shovel
  • Concrete
  • A bricklaying trowel
  • Safety gloves
  • A safety mask

Alternatively, you don’t have to use concrete in order to secure the planting pot to the ground.

Homeowners have also found that placing bricks, sand, and gravel will provide the same stability as concrete.

So, if you want to skip the hassle of mixing your concrete and letting it set, then you should try another method.

What You Should Do

The right steps to attach the gazebo to your patio pavers are as follows:

Step #1: Remove Pavers

Start by positioning the gazebo the way you want it to look.

Next, you’ll want to count each brick that the gazebo posts have.

From there, take your chalk out and mark each one of the bricks that rest underneath each gazebo post.

Now, pull out your flathead screwdriver and tap it using a rubber mallet.

After that, lift the marked pavers carefully to avoid damaging the others.

Step #2: Dig Holes and Insert Posts

Take out your shovel and dig 10 inches into the ground.

After that, take the gazebo posts and lower them into each hole.

Step #3: Mix and Lay Concrete

First off, you’ll want to put on your safety gloves and mask to prevent the chemicals from coming into contact with your skin.

After that, you’ll want to mix your concrete by pouring the mixture into an old bucket and adding water according to the manufacturer’s instructions.

After mixing, take the concrete and slowly pour the mixture into the holes to secure the posts.

Next, level the concrete, ensuring that it’s the same height as the pavers.

Once you’ve leveled everything, clean up any excess concrete and tidy up.

Now, you’ll need to let the concrete mixture sit and dry for at least 48 hours at minimum.

Attaching Gazebo To Paver Patio Effectively

Learning how to attach a gazebo to a paver patio can be complicated and irritating.

That said, there are steps you can take to evaluate which method works the best.

The methods we recommended require basic handyman skills and readily available materials.

If none of the methods are working, you may need to contact a professional to get some guidance.

Remember, a gazebo isn’t designed for harsh weather and will likely be fine in mild climates.

Although, when fall or winter hits, that’s when you’ll wish you attached it to the ground.

Hopefully, we’ve helped you learn a bit more about attaching gazebo to paver patio.

Leave a Comment

Your email address will not be published.

Special offer for our visitors

Get your Patio & Outdoor Free Guide

We will never send you spam. By signing up for this you agree with our privacy policy and to receive regular updates via email in regards to industry news and promotions